This article will walk you through the steps on setting your Ingenico Link 2500 up with mobile Hotspot.
Content:
Setup Hotspot with iPad
Setup Hotspot with iPhone
Setup Hotspot with Android Phone
Setup Hotspot with Link 2500
Setup Hotspot with iPad
1. Turn on your iPad > go to Settings.
2. In Settings > select Cellular Data > Personal Hotspot.
Make sure that the “Allow Others to Join” is switched ON.
3. Continue with the steps to Setup Hotspot with Link 2500
Setup Hotspot with iPhone
1. On your home screen, click Settings > Personal Hotspot > Allow Others to Join.
2. Continue with the steps to Setup Hotspot with Link 2500
Setup Hotspot with Android phone
1. On your home screen, swipe down your menu and find your Mobile Hotspot icon.
2. Continue with the steps to Setup Hotspot with Link 2500
Setup Hotspot with Link 2500
1. On the Link 2500 device, press 0001 on the pin pad. This will take you to the Admin Menu.
2. Press 2 - WIFI Parameters. (or use the down arrows - located above the numbers on the pin pad)
3. Press 2 - Scan Networks (or use the down arrows - located above the numbers on the pin pad)
4. Locate your Secure Wi-Fi Hotspot network and select it from the list (You can select an item by pressing the green button)
NOTE: If you cannot find your network, try finding it on your phone and connect to it to make sure that a device can connect to your network.
5. Enter your password and press the green button. The F key will switch between numbers and letters. You will need to press a number multiple times to reach specific letters. (Example: If you need a < C > You will need to press the Number 2, 3 times).
6. Once the password has been entered Restart your device. Press the yellow button and the # key at the same time.
NOTE: Should the device say “shutdown in progress” instead of restarting > press the green button to power the device back on.
7. When the system comes back online it should automatically connect to the Hotspot wi-fi (When out of range of the Clubhouse Wi-fi).