Step 1: Scan the USB Serial Barcode
NOTE: With the Genesis, you are able to scan barcodes off of phones and / or computers by holding the top button down.
Step 2: See if the scanner shows in the com port field within the ClubReady Desktop App.
Step 3: If it does not show, navigate to the Device Manager (search for this on the computer).
Step 4: Look under Universal Ports to see if Honeywell shows or not.
- If Honeywell does show - reboot the computer, unplug and replug the scanner in to see if it will then show as a com port.
- If Honeywell does not show - you will need to uninstall and reinstall the drivers for the scanner. You will need to be given the drivers for this scanner. When reinstalling, unplug the scanner.
Once this has completed, make sure to reboot the computer and then pull up the Desktop App in the ClubReady site. From here, choose to Modify it to attached to the scanner.
The scanner should now work. If it does not, uninstall and reinstall the app one last time.
